If you recently cut a tree in your yard, then you have many options to get rid of the unsightly stump. You can dig it by hand, grind it, burn it or use chemical stump remover. Choose the method that works best for the root system you are working with.
Digging Out the Stump
Dig around the roots. Use a shovel to dig next to the stump, while highlighting the roots below the dirt. Move around the perimeter of the stump and keep digging until you uncover the biggest roots around the tree. Dig deeper on either side of the roots to expose them as much as possible.
If the roots look very large and deep, and it is difficult to fully expose them, then you may want to consider a different root removal method. Excavation method works best when you are able to uncover the roots almost their tips.
Cut the roots up. Depending on the size of the roots, use the loopers or a root to cut the pieces. Cut them into manageable pieces and pull them out of the ground. Throw them as much as possible and throw them in a heap.
It is possible to use an ax to cut roots, but is not recommended as it can be dangerously shattered if it collides with a rock, and it will usually get stuck between the roots if they are completely exposed Are not there.
Pull the roots out. Use a grub hoe to wipe embedded roots out of the ground for their very tips. If you need to cut more when you go, do so – it will make it easy to pull them out of the ground. As long as you do not remove all the major roots, keep moving, then go back and take out whatever remains left.
Remove the stump. After processing all or most of the roots, you should be able to easily dislike the stump. You may need to use the shovel to dig down under the stumps and cut some other roots down before putting it out.
Now when all the wood has been removed, you can cut it and add it to your compost pile.
Fill in the hole. The final step is to fill the hole with sawdust or sawdust. If you fail to do so, then the ground around the hole will collapse and there will be a bigger dent in that yard. As the loam plant or sawdust settles, the ground will be drowned a bit, so you may need to add material to the area every few months before the ground becomes flat.
Grinding the Stump
Find out a stump grinder. This machine pumps the stump and its root system to a depth of about one foot below the ground. Stump grinder can be rented from the machine rentals in the day. If you do not want to operate the machine yourself, then you can keep someone with a stump grinder to come in your property and work for you.
If you plan to operate the machine yourself, then you should wear gloves, goggles and ear protectors.
Place it on top of the stump and start grinding. Following the manufacturer’s instructions, turn on the stump grinder and turn it on. It will grind the surface of the stump and work its ground in the ground to grind the roots. You will need to move the stump grinder around the perimeter of the stump to take care of the air roots as well.
Shovel out the grilling. If you remove the ground from the wood, the land will repair itself faster. Shovel it out and put it in your compost pile or dispose it in another way.
Fill the hole. To fill the hole, replace the grinding or grinding with sawdust. Continue to add it to the area as a depressant over time.
Burning the Stump
Find out if burning stumps is legal. There may be restrictions for open fire in your area, especially if you live somewhere with draft conditions. Before starting, call the local fire department to ensure that your stumps are burned.
Build wood fire over the stump. To burn the fire over the stop, it may be easy to use a tree cut by you as a fuel. Place the wood above the stumps. Cover the stump with more wood, so that the stumps are in the center of the fire.
Keep the fire burning. It will take several hours to burn the stump. Keep adding more wood so that the fire is big and warm. Keep it burning as long as it takes to remove the stump and burn it on the ground.
Shovel out of the ash. After burning the stump, remove the ash from the hole and discard it.
Fill the hole. Replace the ash with a loaf or sawdust. When it dries in every few months, keep adding substances to that area.
Using a Chemical Stump Remover
Drill holes in the stumps. Use a drill with a large bit to drill a series of holes in the top of the stump. The stump will absorb chemicals through these holes, so make sure you give them the same place.
Apply Stump Remover. Most stump remover powder are made of potassium nitrate, which reacts with softening the wood and rotting faster. Check the instructions on the package and apply stumps remover to the stumps according to the instructions.
Keep children and animals away from the stump. If stump remover powder is swallowed, it can harm children and pets, so make sure they do not go near it.
Monitor the stump. It should soften and start rotting within a few weeks. When you remove it to be soft enough to be easy to remove, it’s time to finish this task.
Chop it off Use an ax or shovel to cut the falling stumps. Remove the pieces as you cut them. Keep running until you balance the stump.
Burn the rest. Fire the remaining soft wood and burn it completely from the bottom. In this way you will remove the left over the stump and its roots.
Replace the ashes with loam. After the fire extinguishes, remove the remains which you have left after digging. Fill the hole with a sawdust or another filler, like a sawdust. Until the ground is leveled, keep adding more material for the next few months.
Creative Commons License