How to Become an Internet Provider

Becoming an Internet Service Provider (ISP) is a rewarding task, but starting a new service is a great surrender. The biggest obstacle is the amount of funds required for equipment and construction space. Plan your placements of relay signals, then invest in quality devices to provide quick internet connection to your users. Keep your setup to keep your service stable and even expand it over time.

Finding a Location for Your Service

Find an appropriate building to stay in the ISP’s data center. The ideal place for your data center is the upper floor of a tall building. By setting up your service at a higher position, the wireless signal of your antenna travels further. There is also a need to serve the data center through a fiber Internet cable. You have to use these cables to establish your service.

Find out the data centers in your area. Ask your equipment to rent on the roof for your equipment. Some data centers also sell a strong Internet connection, which is called a dedicated internet access, which you can use to run your business instead of fiber cables.

To find out where fiber cables are, search fiber optic internet providers in your area. Ask them about their network and if it reaches your potential data center. Also, speak for more information with the building’s property owner and any other tenants.

If the location of the data center is not near the quality fiber lines, you will have to pay an internet service provider for installation. It’s expensive to do this, so you better find a place that already has a good upstream fiber connection.

Search for other high places to install your relay. These high places relay your ISP signal to your customers from the data center. Drive around you and use online maps to identify potential locations on lease. There are great spots to consider on radio towers, water towers, hills, mountains, high buildings, and even some houses. Visit these places to get a good view of the scenes.

You should be able to see your customer’s house with a tower, otherwise the signal will not reach them. Mountains, trees and other buildings can make difficult.

The goal of serving approximately 50 customers for each relay tower. If you put relays in areas without many houses then expect to lose money. Large ISPs avoid rural communities for this reason.

Relay towers spread the wireless signal To create a fast Internet connection when away from the tower, you can lay fiber optic cables in the ground. Creating a fiber optic network is extremely expensive, so most people stick to wireless technology.

Negotiate for your data center and relay. You have to rent the space for each part of the network you want to set up, so be prepared to talk to a lot of people. Track property owners by going through public records or searching. Then, ask the owner that you install your ISP device. Expect to pay $ 100 to $ 500 per month for each lease.

Property owners can be difficult to track. You may also need to find alternate places to relay your relation.

Use your network to negotiate. Promises to give free internet to property owners Most people will give you less monthly lease for your troubles.

Set up an upstream fiber connection with the internet provider. Do research on upstream companies in your area to compare prices. Try to get a service that operates in 1 gigabyte per second. Such a fast connection allows you to create internet service for 500 to 800 customers. The setup takes about 90 days and the cost of fiber service is $ 1,000 to $ 3,000 per month.

If you can not find a building that already had fiber cable service, then the internet provider would need to run and run the cable in your data center. Creating a building often costs $ 15,000 USD.

Most ISP services have 2 to 5 upstream connections to provide quick, consistent service.

Buying Provider Equipment

Buy Access point equipment for each relay point. Calculate the number of relay locations you have chosen, then start shopping for a router or switch. These components allow users to connect to your network. Switches are less expensive than the router, but the router has a lot of features.

Router and switches are available on many electronics stores. They are also available through online suppliers. Basic versions start at around $ 50, but large, fast boxes often cost several hundred dollars.

The router is used to connect the network. You can use the router to create a network of customers in a single area. Each customer connects to your network via a unique IP address, which is easy to track. Compared to router switches, work better for Wi-Fi systems.

Switches are better for single-network systems. If you are making a small ISP operation in the same area, switch router can be a better option. Each user gets a different MAC address. Switch works better with wired connections.

Buy Customer-Complex Equipment (CPE) to install on customer’s homes. CPE fits into the customer’s roof, which connects to the nearest access point router or switch. Every customer should have a CPE to join your ISP service. CPE connects the client’s home to a switch or router.

Find low-cost online suppliers like Ubiquiti, MicroTalk and Mimosa for CPE devices and antenna. The price of a basic satellite antenna is approximately $ 100. More expensive versions generally give your strong internet signal with a higher range.

Keep in mind that what kind of roof your customer has. Every CPE satellite is different. Many satellite bolts attach to the roof through the mount, but you can not drill in a flat roof without damaging it. Get a weighted, non-penetrating mount for a flat roof.

Most companies selling access points equipment also sell CPE and backhall. If possible, make a purchase from the same company to get better customer support during installation.

Please select wireless backhouses to help spread your wireless signal. Wireless backhahl helps customers connect with your relay points. They help your customers transmit data on your network. Use backhouses to connect with customers for your router and switch which can not be reached normally

Check backhouses of online suppliers like Siklu and Bridgewave The cost of a good wireless device is usually $ 200 or more.

Install Backhouses in the same way as you would set up a router or switch. To improve the quality of your network, fit the wireless backhouses at the top of towers, buildings and other high areas.

Get client management software to track your network. A good ISP needs a user-friendly way to answer questions, track data usage, bill, and other tasks. To make it easy, choose a system that has all the features you need to do. There are many options, some of which are included free too. To track your network, install the program on your computer in your data center and troubleshoot it if something goes wrong.

An example of a comprehensive program is UCRM. This is a free program that handles billing, network support and other features. It is available at https://ucrm.ui.com/

Building Your Network

Install a router in your data center for your upstream connection. The router needs to work with the fiber connection established by the telecommunications company you have selected. Plug it in, then start configuring it with the settings given to you by your fiber provider. Enable Network Address Translation (NAT) and Dynamic Host Configuration Protocol (DHCP) options so that customers can connect with your service.

Test the router by connecting it to the computer. If you install it correctly, your computer will be able to go online.

The setup process varies from router to router. Consult your fiber provider for troubleshooting.

Establishing a new network is often difficult. If you are not familiar with the operation of the network, consider hiring an IT specialist to help you get your network online.

Mount antennas on relay points to increase your ISP signal. To send your ISP signal out, place an antenna at the top of your data center, then do this on each relay point. You will need to climb the relay point and fit the antenna with the mount. The type of mount you use depends on the relay site you have chosen. Make sure that each antenna points towards your customers and not on each other.

For flat surfaces, choose a weighted mount. This type of mount does not screw in the surface, so it does not cause damage.

For other types of surfaces, choose a secure mount or wall mount with the lag bolt.

Installing antennas is dangerous. You need long stairs, cranes, safety harness and other gear. Consider hiring a professional installer to install the hardware.

Hang Access Point and Backhouses on Your Antenna Use the Weatherproof Metal Clamp to keep these features Tilt the clamp so that they keep the equipment safe from antenna mast. Keep these components so that they look at your customers.

These components communicate with your customers’ home network, so make sure they are safe under the antenna. Do not face them at your data center.

Run cable from access points to network points. Set up the router or switch to the waterproof area, like a wire box in the ground or near a building. Select Outdoor-rated, Preserved CAT5e cables to ensure that your ISPs remain intact for a long time. Plug in cables to turn on your access points.

Loose the ends of cables to keep water from dripping them down.

Consider getting an electrician for a secure, permanent establishment.

Wiring a Customer’s Home

Mount the CPE at your customer’s home to see what kind of roof your customer has, take a look around the installation site. Then, choose a bracket that works well on that type of roof. Get a weighted mount for a flat roof. Try to use the lag screw mount to install the antenna on a pitch roof. Point the antenna towards the nearest relay point when you are doing.

Increasing space depends on many factors. For example, find out where you can play cable in the house. Ensure that the growing space is in the wake of the nearest relay antenna.

Drill a hole in the house if you need it for wiring. Find the best places to run the wire on your user’s network device from CPE To do this, use the stud finder to find the beam that keeps the wall straight. Keep the hole from the stud at least 3 in (7.6 cm). Drill the masonry bit 18 (46 cm) long and in 3 diam (0.95 cm) in diameter, drill all the way through the wall.

Look for spots for other ISPs, telephone companies, and cable companies to get the wire in the house. You may be able to use these places to wire the device without drilling.

Be aware of any living stars in the wall. To avoid problems with your drill, use AC wire detection stud feeders to identify problems.

Always ask your customer before installing or drilling anything. Tell them about the installation process. Get their approval.

Play Weatherproof Cable from CPE in your customer’s home. Use the same CAT5e cables you used on your relay point. Keep the cable against the house tight by securing the drain with the zip or cable clip. Bring the cable under the wall, then thread through the hole that you drill.

Get help from a friend with cable to make installation easier. Instruct them to watch the cable and when you push it into a drilled hole, take it out.

Connect the antenna cable to the switch or router. Power over Ethernet (PoE) switches are the easiest tools to hook inside homes. You have to plug the antenna cable into the wall jack. Then, use a shielded patch cable to plug the switch or router into the jack. Connect the switch or router to a wall outlet to power it.

For easy installation, provide router and modem for your customers. If you do not do this, tell customers which devices are compatible in your service. Each customer has to get their own modem to enable Internet access and enable their own router to enable Wi-Fi.

Connect the laptop to the switch to complete the installation. If you have installed the antenna correctly, then you will be able to find your ISP signal through the software of your computer. Use software to install antenna firmware update, change access password, and set customer specific IP address. Before locking the antenna in place, use the software to adjust its position to achieve its network signal as much as possible.

Test the Internet connection before you go. Login to the Internet on your laptop. Make sure the connection is fast and stable.

Setting up an ISP Business

Make a business plan to organize your goals and finances. When you set up your ISP, a comprehensive business plan keeps you organized. In a good business plan, you describe your goals as ISPs, how you will serve customers, and how much you will charge for it. Also, describe how much money you need to get started, how many employees will you work on and how you deal with problems such as maintenance issues.

If you intend to sell your service as an ISP, then you need a good plan. While you do not need it for a personal service, a plan is useful.

Banks look for good business plans while giving credit. Since ISP is expensive, so there is a good plan to secure funding.

Check your local rules for installing a new ISP. Every country in the world has its own separate rules that determine how ISPs work. States and cities can also make their guidelines, so be sure to visit the nearest government office for advice. In many places, you can set your ISP without any legal hassles.

Keep in mind that national ISPs work in most areas. In some countries, you can not even be allowed to establish a new ISP business.

If you plan to sell your service, get a business license from the government. Submit your license application to your government’s commercial office. Get the application on your government’s website or personally visiting them. You must list the name of your business and what it does, and how it operates. Then, wait 1 to 2 months to get your license in the mail.

If you do not want to serve your customers then you do not need to get a business license. There is a possibility that no one will bother you if you only establish a service for you and for people you know.

Market your internet service for potential customers. Most people already have an ISP. To compete with existing businesses, start advertising. Buy ads on local TVs, buy advertising space in newspapers and magazines, and send your customers to their relay towers Also, to tell you to go from door to door to offer your service.

Expect the people to be with their old ISP. Even if they are not happy with their ISP, they can not feel sufficiently motivated to make changes. Focus on the customers you want to grow your business.

Maintain your equipment to keep your service running. Refer to your customer management program to monitor your service. Cable and other equipment get spoiled over time. Sometimes the components are damaged by bad weather, animals or other accidents. Repair and purchase new equipment as needed to keep your business profitable.

If you have a good network tracking system, it will show you when something in your network is wrong. Send to a technician as soon as possible to repair.

Leave a Reply